How to Use Wafer Cone Machine?
What Can Wafer Cone Machine Do?
What is the Operation Steps of Wafer Cone Machine?
Note: Unplug the power when not in use, clean the upper and lower molds in time, and keep them clean.
Wide Range of Uses:
The machine can be used to make wafer cones of different shapes and sizes, they are petunia shape, horn-shaped, double-headed, rectangular, tulip-shape, rose-shaped, and other animal shapes. The surface of the cone can be engraved with the company's name and logo, special needs can be customized.
In this article, this 60 mould wafer cone maker machine can make 60 cones at a time, it needs to bake for 1 to 2 minutes. Its thickness is between 2 and 2.5 mm, and the output is 1,800 piecs per hour. It is a large-volume, semi-automatic wafer cone machine.
In addition, we have other models to choose from, 2, 4,10, 12, 24, 24C, 32, 32C, 40, etc. If you have any questions, please contact us. Email: lisa@machinehall.com, Whatsapp/Wechat/Tel: 008615515571373, Skype: jacobyaogelgoog.
This series ice cream cone machine is specially used to make wafer cones, flour, water, starch are the main formula. When these materials are stirred into batter, they can be used to make the raw materials of the cone.
1. Connect the power supply, set the upper and lower mold temperatures, and wait for the temperature to rise.
2. After the temperature rises, pull the upper mold up and the lower mold to close.
3. Pour the batter and press the mold onto the lower mold. After one or two minutes, the cone can be molded.
4. Pull the mold and open the lower mold. The cone will automatically fall into the lower channel and slide out.
Note: Unplug the power when not in use, clean the upper and lower molds in time, and keep them clean.
Wide Range of Uses:
The machine can be used to make wafer cones of different shapes and sizes, they are petunia shape, horn-shaped, double-headed, rectangular, tulip-shape, rose-shaped, and other animal shapes. The surface of the cone can be engraved with the company's name and logo, special needs can be customized.
In this article, this 60 mould wafer cone maker machine can make 60 cones at a time, it needs to bake for 1 to 2 minutes. Its thickness is between 2 and 2.5 mm, and the output is 1,800 piecs per hour. It is a large-volume, semi-automatic wafer cone machine.
In addition, we have other models to choose from, 2, 4,10, 12, 24, 24C, 32, 32C, 40, etc. If you have any questions, please contact us. Email: lisa@machinehall.com, Whatsapp/Wechat/Tel: 008615515571373, Skype: jacobyaogelgoog.